FORT WORTH FIREPROOFING
Hotline:800-333-9197 7am-5pm (CST) Ph: 817-740-9197
After Hours: 817-658-9197 / email: email@example.com
|Abilene, Dallas, Fort Worth, San Antonio, Austin, Houston, Corpus Christi, Oklahoma City, Tulsa, Kansas City, St. Louis, Texas, DFW, Odessa|
Fire Retardant & Flame Retardant Coatings
Fort Worth, Texas based Flame Safe Chemical Corporation manufactures the Most Effective Fireproofing coatings, Fire Retardant and Flame Retardant Coatings, Penetrants & Sprays in the World
Spray on Fireproofing & Fire Retardant Coatings & Penetrants
Wood, Plywood, Lumber,Timber & Timbers, Thatch & tiki hut Thatching, Bamboo, Fabric, Canvas, Paper & Cardboard, Christmas Trees, Dry grass and brush, Wood Shingles, fencing, and siding
Fire Retardant Coatings for Composite Pipe, PVC
Fort Worth based FLAME SAFE WOOD PRODUCTS manufactures Fire Retardant Vacuum Pressure Impregnated, Kiln Dried after Treatment
EXTERIOR and INTERIOR FLAMEPROOF PLYWOOD - FLAMEPROOF LUMBER - FLAMEPROOF TIMBER & TIMBERS and FLAMEPROOF WOOD SPECIALTIES
Fire Poly™ 100 - Class A fire proofing coatings for wood, plywood
Fort Worth, Texas
Flame Safe Chemical Corp. & Flame Safe Wood Products
Fireproofing coatings can save lives and property
Some keepsakes cannot be replaced
THE BEST INSURANCE IS PREVENTION
|Fire and Flame Proof Coatings||1-800-333-9197||Fire Retardant Wood Products|
As demonstrated on the national television show
Most fireproofing products presently on the market do not have testing by accredited third party testing agencies to back their claims. Flame Safe’s fire retardant spray coatings and flame retardant products have been tested by accredited third party testing agencies such as Underwriters Laboratories, Underwriters Laboratories Canada, Southwest Research Institute, United States Testing, Western Fire Center, Forestry Commission of New South Wales Australia, European Institute for Fire Research, United States Forestry Department and Maxim Technology.
Some of our testing includes: ASTM E84 Surface Burning Characteristics of applied coatings - Class A (UL Type I) and Class B (UL Type II); ASTM E108 Burning Brand, Flying Brand, Spread of Flame, Intermittent Flame Exposure; ASTM E 162 Flame spread and ASTM E662 smoke generation; Classification for Plastic Pipe, International Maritime Organization (MQ) Resolution A 753 (18) ASTM F1173-95 ASTM D4372, CFR 1632.4 (FF 4-72) Fire Retardant Coating; FAR 25.853 a & b, CALIF 1237.1, NFPA 701, CAL TECH 117-F, NY-NJ PORT, BOSTON
Flame Safe warrants it’s products to perform as tested and will furnish test reports upon request, in addition to those published on our web site.
FLAME SAFE CHEMICAL manufactures a complete line of fire proofing spray coatings and fire retardant penetrants that meet or exceed industry’s fireproofing standards. The effectiveness of Flame Safe’s fire retardant products are well documented.
The uniqueness of FLAME SAFE’s fireproof products are not only their simplicity of application, their low cost, their environmental safeness, their tested proven certifications, but most importantly they are required by code. Fire codes are written and enforced to save lives and property.
Uniquely, FLAME SAFE’s fire proofing spray coatings and penetrants are easily applied, colorless, non-toxic, environmentally safe, and are aqueous based fire retardant chemicals.
FLAME SAFE has both interior and exterior fire protection coatings, penetrants, and fire retardant sprays for wood, wood products, architectural millwork, molding and trim, lumber, plywood, wood shingles, timbers, trusses, deckin, fencing, fiberglass and plastics, fabric, theater curtains, drapes, upholstery, mattresses and bedding, thatch, thatching, tiki huts, paper, cardboard and packaging systems for combustible liquids. The Fire Buster™ is a fire retardant treated fabric available for commercial and residential use.
EXTERIOR FIRE RETARDANT LUMBER
For those specifications that call for an exterior fire retardant lumber or plywood that will have exposure to the elements or high humidity conditions Flame Safe XT is the product of choice.
In addition to passing the ASTM E84 test for surface burning characteristics, which all exterior fire retardant lumber and plywood bearing a Class I stamp must pass, Flame Safe XT has passed the ASTM D2898 accelerated weathering (rain) test as well.
Flame Safe XT has a clear finish which can be stained with a water based stain or painted with a latex based paint. Flame Safe XT is rot and decay resistant and may be specified with a water repellant is so desired. Applications such as exterior decks, balconies, stairs or siding ar the notable examples of where Flame Safe XT would be the logical choice
PROPERTIES OF FLAME SAFE FIRE RETARDANT LUMBER and PLYWOOD
Permanence: Flame Safe interior fire retardant lumber and plywood is a permanent guard against the spread of flame
Strength: Flame Safe's aqueous based resin treatment and kiln-drying process strengthens the wood
Hygroscopicity: Flame Safe's exterior and interior fire retardant lumber and plywood is no more hygroscopic than untreated wood of any given species
Corrosion: Flame Safe exterior and interior fire retardant lumber and plywood does not demonstrate any greater corrosion rate than untreated wood on metal fasteners or hardware
Decorating and Finishing: Flame Safe exterior and interior fire retardant lumber surfaces can be stained and painted with ordinary preparation, however avoid using lacquer based stains or varnishes
Field Cuts: Flame Safe exterior and interior fire retardant wood allows the user to re-surface, mill, or rip lumber or plywood provided the exposed surfaces are coated with Flame Safe fire retardant coating (Fire Poly)
Versatility: Flame Safe exterior and interior fire retardant lumber and plywood is compatible with most waterborne preservative treatments for lumber, plywood and timber for exterior and in ground use
Flame Safe Wood Product's exterior and interior fire retardant lumber, plywood and timbers and Flame Safe Chemical’s fire retardant products have been tested by accredited third party testing agencies. Flame Safe warrants it’s products to perform as tested and will furnish test reports upon request, in addition to those published on our web site.
FLAME SAFE is dedicated to setting not merely following the fireproof industry standards through ongoing research development and testing programs. FLAME SAFE continually endeavors to educate the marketplace on the significance of fireproofing combustible materials through the use of flame retardant products.
Click here for more information on
FLAME SAFE CHEMICAL CORPORATION'S
Fire proofing Spray Coatings and Fire Retardant Penetrants
Flame Safe Manufactures the most effective fire retardant coatings and sprays to fireproof fabric and fabrics for theatrical curtains, upholstery, canvas tents, mattresses, clothing, carpet, wall coverings, paper, cardboard, lumber, wood, plywood, timber and timbers, thatch & thatching, Tiki huts, grass, brush, and fire retardant spray for Christmas trees
FLAME SAFE WOOD PRODUCTS
Fire Retardant Vacuum Pressure Impregnation
Fire Rated Wood Plywood Lumber and Timber & Timbers
Exterior and Interior Fire Retardant Plywood - Fire Retardant Lumber - Fire Retardant Timbers
2653 Warfield Avenue, Fort Worth, Texas 76106
Phone:1-800-333-9197 or 1-817-740-9197
Middle Eastern inquiries contact Kemya Chemical & Industrial Services WLL
www.kemya-q8.com/ e-mail: firstname.lastname@example.org
Kuwait City, Kuwait, Dubai, United Arab Emirates, Abu Dhabi, Muscat, Sur, Oman, Khartar, Sanaa, Yemen, Dhamar, Taizz, Aden, Riyadh, Saudi Arabia, Medina, Mecca, Tabuk, Jeddah, Al Bahah, Abha, Alexandria, Egypt, Cairo, Egypt, Baghdad, Iraq, Basra, Mosel, Kirkuk, Al Fallujah, Beirut, Lebanon, Amman, Jordan, Damascus, Syria, Aleppo, Tadmur, Homs, Al Mayadin, Ankara, Turkey, Adana, Doha, Qatar, Manama, Bahrain, Tehran, Iran, Bandar, Abbas, Shiraz, Tabriz, Pakistan, Turkmenistan
The information contained herein is the property of Fire Prevention Technologies d/b/a Flame Safe Chemical Corporation and Flame Safe Wood Products, Inc . © 1990 Revised 8/20/2009